Image of BP4073 Shotgun Microphone
 

BP4073 Shotgun Microphone

Rivals Long-Tube Shotgun Microphones Though only approximately 9.2" long, the BP4073 offers the directivity of microphones up to 50% longer than it. This is accomplished through the use of a special Audio-Technica design that grants the BP4073's interference tube a narrow acceptance angle. Broadcast-Quality Sound The BP4073 was built to produce broadcast-quality sound. Its direct-coupled balanced output provides clean signal even in high-output conditions; the balanced topology also allows longer cable runs than typical unbalanced camera-mount mics afford. The supercardioid polar pattern yields focused on-axis directionality with maximum rear-entry sound rejection. Its low self-noise of 13 dBA and highly sensitive condenser element communicate detailed audio unburdened by the hiss that plagues many low-cost microphones. Customizable Tone Activate the 80 Hz low-cut filter to reduce low-frequency noise from common sources such as air conditioners and traffic. Switch on the -10 dB pad to attenuate the input level when loud sound sources threaten to distort your recording. Phantom Powered Thanks to its 3-pin XLR output and 48 VDC phantom powering, the BP4073 is compatible with a variety of handheld audio recorders, field recorders, and mixer adapters, as well as built-in preamps on many camcorders and cinema cameras. Ideal for Boompole Mounting The BP4073 includes a mic clip for easy placement on a mic stand or boompole. Alternatively, mount the BP4073 in the Audio-Technica AT8415 shockmount (available separately) to impede the transfer of vibrations between your boompole and the mic. The BP4073 also includes two rubber O-rings that expand the microphone's diameter to fit the larger mic holders found on many high-end cameras. Windscreen Minimizes Wind Noise The BP4073 has a foam windscreen to reduce unwanted wind noise from breezes, fans, heaters, and air conditioners. Enhanced attenuation of wind noise is possible with the addition of an optional furry windshield such as the Saramonic TM-WS1. For maximum reduction of handling noise and wind noise in indoor or outdoor environments, consider the separately available Rycote Windshield Kit 4, a complete windjammer, windshield, and shockmount suspension system. - Audio-Technica Bp4073 Shotgun Microphone

Price: $1134.00 from CameraPro

Add to Shopping List

Review This Product

Stockist Catalogue Product Name Price  
CameraPro BP4073 Shotgun Microphone $1134.00 Visit Store

Related Products

 
Image of AT897 Shotgun Microphone
 

AT897 Shotgun Microphone

Quality Sound The 11" long AT897 uses an interference tube and a supercardioid polar pattern to yield focused on-axis directionality while attenuating rear-entry sound and rejecting sound at the sides. This makes the AT897 far more effective at capturing...


 
Image of BP4029 Stereo Shotgun Microphone
 

BP4029 Stereo Shotgun Microphone

The BP4029 Stereo Shotgun Microphone from Audio-Technica offers two internally-matrixed modes which provide traditional "left-right" stereo. To accommodate varying acoustic environments, the user may select between a "wide" pattern (LR-W) with increased...